4X4 Or 6X6 For Retaining Wall. Structurally speaking, it is possible to build a strong durable wall any of those ways, whether leaning forward, leaning back or perfectly vertical. 4x4 or 6x6's please help!
4×4 or 6×6 for retaining wall. Lean the wall back into the slope as shown below and drive the rebar down. The drawing just does not give information on the height of the deck.
Long ago i worked for a landscape guy and built 6x6 retaining walls, among other things like decks, fences, etc. I got quotes for $20k+ and decided it was worth the diy effort. See below for a shopping list an.
But Just Fyi, What Matters More Is How The Wall Is Constructed.
Set the posts inside each hole. I am assuming it is 8 to 12'. Deck posts 4x4 vs 6x6.
I Welcome Your Comments And Constructive Criticism And Hope It Might Help Others As Well.
After all the rebar is started, drop the timbers to the ground. After doing a bunch of research i've started to build a 18 high retaining wall out of 6x6 pressure treated lumber (well, actually the first course is 4x6, but the rest will be 6x6) which will be approximately 24 feet long. 6x6 vs 4x4 (or 4x6) retaining wall.
A Lot Of Diagrams I See Online Look Like The Have 4X4 Posts And Two Supports (2X12 Or Similar) Bolted To Both Sides.
I am trying to sketch out and estimate materials and cost for a 20x20 deck. With your shovel, follow the line and dig out a groove about 5 inches deep where the retaining wall will rest. As the backfill loads the wall it.
If You Want To Make It Vertically Straight, That Is Very Doable.
Retaining walls are built for several purposes. Still, retaining walls might also be installed just for the purpose of being aesthetically. The drawing just does not give information on the height of the deck.
Share
Post a Comment
for "4X4 Or 6X6 For Retaining Wall"
Post a Comment for "4X4 Or 6X6 For Retaining Wall"